Do Watch Winders Damage Watches?


Do Watch Winders Damage Watches? by ohmyclock.com

No, in normal circumstances, considering that the quality of the watch winder is not too bad, a watch winder should not damage watches.

For those of you who don’t truly know what a watch winder is, it is basically a box shaped tool in which you place your automatic watch, when it’s not being worn.

The watch winder would then keep the main string of the watch wound just the way it is when it is worn on the wrist.

A Watch Winder Is A Tool Especially Made For Keeping Automatic Watches Wound!

The watch winder movements keep the mainspring of the watch wound, just as it would if it was worn on the wrist.

However, poor quality or incompatible winders may not be safe for the watch due to magnetization of the watchconstant engagement, and excessive wear of the slip clutch.

An Elaborate Video On Watch Winders!

Why Some People Think That Watch Winders Can Be Dangerous!

  • Wear And Tear

Well, one of the things that is often pointed out by the critiques of watch winders is that watch winders can end up overworking the movement of the automatic watch, as it won’t let it stop.

And a functioning watch 24/7 would ultimately mean more wear and tear and hence the life of the watch shorterning! (But this critque doesn’t hold that strong, as good watches don’t care about how much they are being used, and this critique can only stand when it comes to low quality watches)

  • Magnetism

A watch winder could also harm an automatic watch through magnetism. THis is because, the electric motor along with the magnet that is present in the watch winder can end up producing a magnetic field that can then go on to cause the hairspring of the watch to become sticky.

This could then further lead to the watch becoming inaccurate and erratic. But this only happens in low level watch winders, so you don’t need to worry about this either as long as you have a good watch winder!

  • Overwinding

The difference between a good quality watch winder and a poor quality one is that the former has more refined and well-made running modes.

Since automatic watches have a mainspring that prevents them from being overwound, it is always a good idea to keep a watch wound in a watch winder that is already full.

It is also important to buy a winder that has winding modes that are designed to work with a specific movement. Most qualitative winders have these settings. Also, they have a ”rest mode” that allows the watch to rest without needing to be wound.

With these winders, you can easily remove excess water from your watch, which can prevent it from damaging it. Also, it saves you money on buying a watch winder that has a running mode.

Things To Look For When Buying A Watch Winder!

  • You want to make sure that the program settings are set to allow for a wide variety of turns per day.
  • There are a number of horror stories about cheap watch winders that are being made without any protection for their motor. This issue can cause a watch to be permanently magnetized.
  • A watch’s position should always be vertical in order to maximize the force of gravity when winding.
  • If you’re buying a watch winder, make sure that the pillows or cushions are big enough to not overstretch the band.
  • One of the most common complaints about watch winders are their excessive noise. Fortunately, many of them have found ways to reduce or eliminate this unpleasant sound while working.
  • Back then, watch winders were typically battery powered. This was a waste of space, as it would consume a standard battery rapidly. Also, it’s prone to causing an inconsistent output, which could result in an inaccurate TPD measurement. Today, however, there are many options when it comes to charging.
  • Watch winders should complement and enhance the look of your watch collection. They should also function as an effective home decoration piece.

Should You Put Your Rolex In A Watch Winder?

Well, yes you can, and it shouldn’t damage your Rolex, as long as it is a good quality watch winder you are using. So, do make sure that your watch winder is of good quality before you put inside an expensive watch.

Getting A Watch Winder!

There are two sides to getting a watch winder. Watch winders are either indispensable or pointless. The other case pertains to the oils and lubricants that are used to keep a watch running smoothly.

These components are designed to reduce friction and prevent metal-on-Metal contact. When left dormant, they can either migrate or develop coagulate.

Others believe that keeping a watch tuned up is not necessary since modern synthetic lubricants are more durable than their predecessors. However, this is not true since they can only be affected by various factors such as age and temperature.

There are some people who are fine with having a winder for watches that contain many complications. Others are fine with having one for simple time-only watches.

Having a perpetual calendar or moonphase correction is very inconvenient, especially if it has multiple watches. Doing so can take a long time to get right.

Hopefully, this article was helpful in answering some of your clock-related questions. If you have any clock-related questions, feel free to use the comment section below. And if you want to know why clocks don’t appear in dreams, we have a great article on just that so do give it a click if you are interested “Why don’t clocks appear in dreams? Clocks and dreams!Opens in a new tab.“. Here is also a link about the history of clocks if you want to give that a look “History of timekeeping devicesOpens in a new tab.

Recent Content